Lbs Quick Lift

Month: January 2023 (page 1 of 6)

Qty 2 10mm Quick Release End Lift Supports 14.7 Extended x 126lbs

Qty 2 10mm Quick Release End Lift Supports 14.7 Extended x 126lbs
Qty 2 10mm Quick Release End Lift Supports 14.7 Extended x 126lbs
Qty 2 10mm Quick Release End Lift Supports 14.7 Extended x 126lbs
Qty 2 10mm Quick Release End Lift Supports 14.7 Extended x 126lbs
Qty 2 10mm Quick Release End Lift Supports 14.7 Extended x 126lbs
Qty 2 10mm Quick Release End Lift Supports 14.7 Extended x 126lbs
Qty 2 10mm Quick Release End Lift Supports 14.7 Extended x 126lbs

Qty 2 10mm Quick Release End Lift Supports 14.7 Extended x 126lbs
Qty (2) 10mm “Quick Release” End Lift Supports 14.7 Extended x 126lbs. Specifications (See below for illustration). Extended Length: 14.69 Inches Compressed Length: 9.45 Inches Force: 560 = 126 Lbs. Shaft End Fitting: Quick Release (Nylon) =10mm=3/8=. 39″ Body End Fitting: Quick Release (Nylon) =10mm=3/8″=. Gas Charged Lift Supports are energy storage devices which create force by compressing gas inside a cylinder. Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification. Important Notes about Lift Supports. Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification, please ensure you replace all the supports in the compartment at the same time to ensure proper performance. Our business is lift supports, and we make sure to sell newly produced units, keeping our inventory fresh and rotated. Please take a moment and be sure of what they are actually offering is the Stabilus. We stock several thousand different supports supplied from various quality manufacturers that are not listed here. If we don’t have it we can build many units to your specifications. Special lengths, different pressures or ends, send us the information. Have an existing support with part numbers on it send us any and all numbers that you can find. Depending on the product you are looking at warranties will vary. Lift Supports for the Hood, Trunk, Hatch, Liftgate or Tailgate (None Electrical types). These must be installed in the intended vehicle and the unit stops working properly or to your satisfaction. This policy is subject to change without notice. “Shaft down” is the preferred orientation for mounting a Lift Support. An optimum design would permit the support to be oriented shaft down through its entire actuation. If this is not possible then try to install it so that the shaft is pointing downward in the Closed Position. There are several reasons for this. In order to achieve the damping or “cushion” at the end of the Lift Supports stroke, the piston assembly inside of the Lift Support must travel through oil at the end of the stroke. “Shaft down” orientation ensures that the oil is in the proper location for damping to occur. “Shaft down” orientation ensures that the shaft and sealing components are lubricated with every stroke of the Lift Support. This reduces seal wear and helps to inhibit corrosion. Depending on the application, “shaft down” orientation may reduce the rate of gas permeation through the seal, which increases the usable life of the Lift Support. Some reasons why not to change the orientation of the support. Vehicles with power openers must be installed in the same direction as they came from the factory. Sensors on the door are adjusted to work in the way they were programmed. Installing in the opposite direction can cause them not to work properly. Some models of vehicles do not allow space for the cylinder to be reversed and this will cause a binding when the door or window closes. An example of this is the Ford Excursion Rear Window (or liftgate). Please keep in mind the more often that a cylinder is used the longer it will last. Sitting dormant for any period allows the shaft to bind to the seal and eventually tear. If the application must remain dormant then open the lift supports very slowly the first time they are used. The information provided is Subject To Change Without Notice. Make sure all of your auctions have ended prior to checking out. We accept Pay Pal and Major Credit cards. Please research this before ordering. Please research before ordering. Link at the bottom of this listing. In order to be able to assist you quickly we ask that you supply the following information. B Any and all numbers or markings that are on your old supports. C The part numbers that are on the actual supports that you received. (Not the number on the package but the actual supports). D The year, make, and model of your vehicle and any important details such as Convertible, with or without spoiler, or anything that you think would be helpful. Photos of the issues are great as well. Any items received without authorization are subject to delays and may not receive proper credit. Products that have been damaged during installation or altered will not be accepted. It may take several days to post to your account. Lost Or Damaged Packages: When a package is received damaged, open, or lost in transit we must be notified within 7 days to work with the shipper to correct the issue. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Other Interior Parts & Accessories”. The seller is “mrlousstuff” and is located in this country: US. This item can be shipped to United States, Canada, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Gambia, Malaysia, Taiwan, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Qatar, Burundi, Equatorial Guinea, Thailand, Aruba, Israel, Kuwait, Benin, Algeria, Antigua and Barbuda, Swaziland, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Djibouti, Chile, China, Mali, Botswana, Cambodia, Indonesia, Tajikistan, Vietnam, Cayman Islands, Paraguay, Saint Helena, Seychelles, Rwanda, Bangladesh, Australia, Sri Lanka, Gabon Republic, Zimbabwe, Côte d’Ivoire (Ivory Coast), Kiribati, Turkmenistan, Grenada, Haiti, Greenland, Yemen, Afghanistan, Mongolia, Nepal, Bahamas, Bahrain, Angola, Western Samoa, Mozambique, Namibia, Peru, Guatemala, Solomon Islands, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Western Sahara, Colombia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Ethiopia, Niger, Laos, Ghana, Cape Verde Islands, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Maldives, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, British Virgin Islands, Turks and Caicos Islands, Chad, Costa Rica, India, Mexico, Kazakhstan, Saudi Arabia, Japan, Trinidad and Tobago, Malawi, Nicaragua, Tunisia, Uganda, Brazil, Turkey, Tuvalu, Egypt, Jamaica, Niue, South Africa, Brunei Darussalam, Honduras.
  • Brand: Lift Supports Depot
  • Interchange Part Number: PM3372EZ10
  • Manufacturer Part Number: PM3372EZ10
  • Vehicle Location: Multi Purpose Lift Support
  • UPC: 752785651723

Qty 2 10mm Quick Release End Lift Supports 14.7 Extended x 126lbs

Qty 2 10mm Quick Release End Lift Supports 18.7 Extended x 103lbs

Qty 2 10mm Quick Release End Lift Supports 18.7 Extended x 103lbs
Qty 2 10mm Quick Release End Lift Supports 18.7 Extended x 103lbs
Qty 2 10mm Quick Release End Lift Supports 18.7 Extended x 103lbs
Qty 2 10mm Quick Release End Lift Supports 18.7 Extended x 103lbs

Qty 2 10mm Quick Release End Lift Supports 18.7 Extended x 103lbs
Qty (2) 10mm “Quick Release” End Lift Supports 18.7 Extended x 103lbs. Specifications (See below for illustration). Extended Length: 18.70 Inches Compressed Length: 11.10 Inches Force: 458 = 103 Lbs. Shaft End Fitting: Quick Release (Nylon) =10mm=3/8=. 39″ Body End Fitting: Quick Release (Nylon) =10mm=3/8″=. Gas Charged Lift Supports are energy storage devices which create force by compressing gas inside a cylinder. Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification. Important Notes about Lift Supports. Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification, please ensure you replace all the supports in the compartment at the same time to ensure proper performance. Our business is lift supports, and we make sure to sell newly produced units, keeping our inventory fresh and rotated. Please take a moment and be sure of what they are actually offering is the Stabilus. We stock several thousand different supports supplied from various quality manufacturers that are not listed here. If we don’t have it we can build many units to your specifications. Special lengths, different pressures or ends, send us the information. Have an existing support with part numbers on it send us any and all numbers that you can find. Depending on the product you are looking at warranties will vary. Lift Supports for the Hood, Trunk, Hatch, Liftgate or Tailgate (None Electrical types). These must be installed in the intended vehicle and the unit stops working properly or to your satisfaction. This policy is subject to change without notice. “Shaft down” is the preferred orientation for mounting a Lift Support. An optimum design would permit the support to be oriented shaft down through its entire actuation. If this is not possible then try to install it so that the shaft is pointing downward in the Closed Position. There are several reasons for this. In order to achieve the damping or “cushion” at the end of the Lift Supports stroke, the piston assembly inside of the Lift Support must travel through oil at the end of the stroke. “Shaft down” orientation ensures that the oil is in the proper location for damping to occur. “Shaft down” orientation ensures that the shaft and sealing components are lubricated with every stroke of the Lift Support. This reduces seal wear and helps to inhibit corrosion. Depending on the application, “shaft down” orientation may reduce the rate of gas permeation through the seal, which increases the usable life of the Lift Support. Some reasons why not to change the orientation of the support. Vehicles with power openers must be installed in the same direction as they came from the factory. Sensors on the door are adjusted to work in the way they were programmed. Installing in the opposite direction can cause them not to work properly. Some models of vehicles do not allow space for the cylinder to be reversed and this will cause a binding when the door or window closes. An example of this is the Ford Excursion Rear Window (or liftgate). Please keep in mind the more often that a cylinder is used the longer it will last. Sitting dormant for any period allows the shaft to bind to the seal and eventually tear. If the application must remain dormant then open the lift supports very slowly the first time they are used. The information provided is Subject To Change Without Notice. Make sure all of your auctions have ended prior to checking out. We accept Pay Pal and Major Credit cards. Please research this before ordering. Please research before ordering. Link at the bottom of this listing. In order to be able to assist you quickly we ask that you supply the following information. B Any and all numbers or markings that are on your old supports. C The part numbers that are on the actual supports that you received. (Not the number on the package but the actual supports). D The year, make, and model of your vehicle and any important details such as Convertible, with or without spoiler, or anything that you think would be helpful. Photos of the issues are great as well. Any items received without authorization are subject to delays and may not receive proper credit. Products that have been damaged during installation or altered will not be accepted. It may take several days to post to your account. Lost Or Damaged Packages: When a package is received damaged, open, or lost in transit we must be notified within 7 days to work with the shipper to correct the issue. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Other Interior Parts & Accessories”. The seller is “mrlousstuff” and is located in this country: US. This item can be shipped to United States, Canada, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Gambia, Malaysia, Taiwan, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Qatar, Burundi, Equatorial Guinea, Thailand, Aruba, Israel, Kuwait, Benin, Algeria, Antigua and Barbuda, Swaziland, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Djibouti, Chile, China, Mali, Botswana, Cambodia, Indonesia, Tajikistan, Vietnam, Cayman Islands, Paraguay, Saint Helena, Seychelles, Rwanda, Bangladesh, Australia, Sri Lanka, Gabon Republic, Zimbabwe, Côte d’Ivoire (Ivory Coast), Kiribati, Turkmenistan, Grenada, Haiti, Greenland, Yemen, Afghanistan, Mongolia, Nepal, Bahamas, Bahrain, Angola, Western Samoa, Mozambique, Namibia, Peru, Guatemala, Solomon Islands, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Western Sahara, Colombia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Ethiopia, Niger, Laos, Ghana, Cape Verde Islands, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Maldives, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, British Virgin Islands, Turks and Caicos Islands, Chad, Costa Rica, India, Mexico, Kazakhstan, Saudi Arabia, Japan, Trinidad and Tobago, Malawi, Nicaragua, Tunisia, Uganda, Brazil, Turkey, Tuvalu, Egypt, Jamaica, Niue, South Africa, Brunei Darussalam, Honduras.
  • Brand: Lift Supports Depot
  • Interchange Part Number: PM3544EZ10
  • Manufacturer Part Number: PM3544EZ10
  • Vehicle Location: Multi Purpose Lift Support

Qty 2 10mm Quick Release End Lift Supports 18.7 Extended x 103lbs

WOLF TACTICAL Quick-Release Weighted Vest for Men Workout Vest Strength Train

WOLF TACTICAL Quick-Release Weighted Vest for Men Workout Vest Strength Train
WOLF TACTICAL Quick-Release Weighted Vest for Men Workout Vest Strength Train
WOLF TACTICAL Quick-Release Weighted Vest for Men Workout Vest Strength Train
WOLF TACTICAL Quick-Release Weighted Vest for Men Workout Vest Strength Train
WOLF TACTICAL Quick-Release Weighted Vest for Men Workout Vest Strength Train
WOLF TACTICAL Quick-Release Weighted Vest for Men Workout Vest Strength Train

WOLF TACTICAL Quick-Release Weighted Vest for Men Workout Vest Strength Train
WOLF TACTICAL Quick-Release Weighted Vest for Men Workout Vest, Strength Training Weight Vests Weighted Vest Men. MAXIMIZE YOUR WORKOUT AT THE GYM?? Insert weight plates to add an extra level of intensity when running, rucking, or doing WODs. Weight vest plates are available in pairs of 5.75, 8.75, and 14.5lbs, to create a 14, 20, or 31lb weighted vest. PREMIUM HEAVY DUTY MATERIALS?? This heavy duty vest is constructed with premium 500D nylon material that holds up to sweat and dirt, extreme tactical training, and intense workouts. Our weighted workout vest is built to remain lightweight and mobile while providing high level performance. Oversized airflow panels provide a breathable, contoured fit. Padded yoke back shoulder pads give a perfectly even weight distribution. The vest is fully adjustable at the shoulders and waist, providing a snug but unrestrictive fit, and giving you free range of motion while exercising. Quick release buckles on the elastic waist straps allows for quick in and out of your vest. Add morale patches on the front and back loop panels to customize your training vest. Laser-cut MOLLE throughout the vest allows for easy attachment of pouches, equipment, and other gear. TRUSTED WOLF TACTICAL QUALITY?? Wolf Tactical designs mission-ready gear built to last. We are based in the USA and dedicated to great. Full if your expectations aren’t met for any reason. The WOLF TACTICAL Quick-Release Weighted Vest is constructed with premium 500D nylon material that holds up to sweat and dirt, extreme tactical training, and intense workouts. Get a snug but unrestrictive fit with free range of motion while training. Our steel weight vest plates add an extra level of intensity when running, rucking, or doing WODs. The vest has pockets at both the front and back, capable of holding plates up to 15lbs per pocket. Customize your workout and train progressively. Nothing beats our weighted vest’s strength, durability, and rugged resilience. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. This item is in the category “Sporting Goods\Fitness, Running & Yoga\Strength Training\Weighted Vests”. The seller is “ma.ma.-37″ and is located in this country: US. This item can be shipped to United States, Canada, Australia, Japan, China, South Korea, Indonesia, Taiwan, South Africa, Hong Kong, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Malaysia, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guadeloupe, Jordan, Cambodia, Cayman Islands, Sri Lanka, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion.
  • Color: FDE Tan
  • Package Dimensions LxWxH: 14.49×14.49×4.02 Inches
  • Weight: 2.75 Pounds
  • Brand: WOLF TACTICAL

WOLF TACTICAL Quick-Release Weighted Vest for Men Workout Vest Strength Train

CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair

CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair
CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair
CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair
CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair
CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair
CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair
CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair
CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair
CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair
CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair
CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair
CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair

CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair
CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair. Quickly switch weight, (5-25 lb) between exercises during circuit workouts & lower the downtime between exercises. Easily switch heavyweights for squats and lunges. Lighter weights for curls and triceps extensions. Combines 5-sets of weights into one. We would love to be given the opportunity to work with you to resolve any problem you may have and opening any kind of a case will slow the process down and might not be as favorable if we are not given the opportunity first. If Your Item is Damaged While in Transit. We do not want the damaged item back so there is no need to open a return case. Instead, please send us a message and include photographs of the damaged item as well as the packaging material/box in which the item was received in. Sometimes the carriers will require an inspection of the item and the packing material before they will settle the claim. Please note that manufactures update their packaging from time to time and that the packaging images shown in our listing may vary from what you receive; however, be assured you are receiving the identical contents you ordered regardless. This item is in the category “Sporting Goods\Fitness, Running & Yoga\Strength Training\Dumbbells”. The seller is “lonestar_17″ and is located in this country: US. This item can be shipped worldwide.
  • Features: Adjustable Weight
  • Custom Bundle: No
  • MPN: SDBA-50G3C
  • Department: Unisex Adults
  • Item Width: 17.75
  • Vintage: No
  • Material: Cast Iron
  • Item Weight: 25 lb
  • Sport/Activity: Weight Lifting
  • Brand: CAP
  • Color: Black
  • Signed: No
  • Personalized: No
  • Type: Set
  • UPC: 702556120231

CAP Barbell Adjustable Dumbbell Set Quick Select Adjustability 5-25 lbs Pair

Rancho RS999945 Loaded quickLIFT Complete Strut Assembly

Rancho RS999945 Loaded quickLIFT Complete Strut Assembly

Rancho RS999945 Loaded quickLIFT Complete Strut Assembly
Loaded quickLIFT Complete Strut Assembly. Award-winning Rancho® quickLIFTT Loaded assemblies level and lift late-model trucks and SUVs, providing an aggressive stance and allowing for the use of larger wheel and tire packages without the cost of a complete suspension system or the long installation time. Each Rancho quickLIFT Loaded unit is a gas charged complete modular assembly that includes an application-specific, installed coil spring and upper mounting plate to simplify installation. Engineered with the globally renowned and exclusive RS9000TXL nineposition adjustability, Rancho quickLIFT Loaded units improve performance and provide the ability to manually tune the vehicle’s ride to suit terrain and driver preference. Pre-assembled with coil spring and upper mount. Removes the factory rake. Clears up to 35-in. Creates a custom look, increases ground clearance. Easily adjust ride quality and performance. Premium long lasting finish. Compressed Length: 16.93. Extended Length: 22.24. Travel Length: 5.31. Our system is completely automated. We are unable to cancel or make changes to any order after it has been placed. If this occurs, we will notify you immediately. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Shocks, Struts & Assemblies”. The seller is “jdautoandtruck” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
  • Brand: Rancho Performance Suspension
  • Manufacturer Part Number: RS999945
  • Other Part Number: ROSRS999945
  • UPC: 39703007320

Rancho RS999945 Loaded quickLIFT Complete Strut Assembly

Universal Power Upgrade Kit For Lambo, Gullwing, Suicide, Vertical Doors AutoLoc

Universal Power Upgrade Kit For Lambo, Gullwing, Suicide, Vertical Doors AutoLoc
Universal Power Upgrade Kit For Lambo, Gullwing, Suicide, Vertical Doors AutoLoc
Universal Power Upgrade Kit For Lambo, Gullwing, Suicide, Vertical Doors AutoLoc
Universal Power Upgrade Kit For Lambo, Gullwing, Suicide, Vertical Doors AutoLoc

Universal Power Upgrade Kit For Lambo, Gullwing, Suicide, Vertical Doors AutoLoc
Old school, locally owned, and operated Gilbertson’s Machine Shop has been rebuilding American Muscle Cars in the industry for over 40+ years. Fueled by our love of classic cars weve built a name for ourselves in and around our community by insisting on nothing but the best for our customers. We pride ourselves on offering only the highest quality manufactured parts, that we ourselves actually used in all of our own build projects, because we know that the quality is exceptional! Each one of our staff members are extremely well versed in all things Hot Rod, Muscle Car and Truck. Each has an extensive amount of product knowledge based on personal experience in the industry and in our shop too! The Gilbertson’s Machine Shop family is standing by to help you with whatever you need to make your next build, the baddest on the block! Universal Power Upgrade Kit For Lambo, Gullwing, Suicide, Vertical Doors AutoLoc. Product Description Power Up Those Doors! Gilbertsons Speed universal power door upgrade kit allows you to add fully automatic operation to any door. Only Gilbertsons Speed offers heavy duty motors that are geared to lift your door in a fast smooth operation. Can be hooked up to an alarm for remote operation. Ideal for suicide doors, lambo doors, gullwing doors, butterfly doors, vertical doors and more! Featured on several TV shows including Monster Garage, and Pimp My Ride Gilbertsons Speed Lambo Door kits deliver where all others fails. Insist on the best, Feature :: Universal Power Upgrade Kit Fits :: Lambo, Gullwing, Suicide, Vertical Doors Anti Wobble :: Yes Number of Doors :: 2 Motors :: 2 Speed :: Adjustable Material :: Metal Finish :: Chrome or Painted Feature :: Detailed Instructions ::: 8″ Actuator Specs ::: Feature :: Ball Bearing Rod Feature :: Heavy Duty Motor Feature :: Ball Bearing Rod Bearing Size :: 5/16 Base Bearing Mount :: 5/16 Feature :: Actuator- Finish :: Silver Material :: Steel Length Base :: 3.75 Width :: 2.125 Travel/ Stroke :: 8 Length Compressed :: 17″ Length Extended :: 25 Feature :: Built in Limiter Switch Feature :: Screw Drive Assembly Feature :: Lifts up to 200lbs! We do not accept COD packages. All exchanges need to have reshipping charges included. In some cases stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Other Car & Truck Parts & Accessories”. The seller is “gilbertsonsmachineshop” and is located in this country: US. This item can be shipped worldwide.
  • MPN: ZGM17106A
  • Manufacturer Part Number: ZGM17106A
  • Interchange: AUTUDSP
  • Brand: Gilbertsons Machine Shop
  • Feature: Universal Power Upgrade Kit
  • Fits: Lambo, Gullwing, Suicide, Vertical Doors
  • Anti Wobble: Yes
  • Number of Doors: 2
  • Motors: 2
  • Speed: Adjustable
  • Material: Steel
  • Finish: Chrome or Painted
  • Instructions: Detailed Instructions
  • Support: Free Tech Support
  • Warranty: Limited Lifetime Warranty
  • ———————-: Other
  • # of Actuators: 2 Included
  • Max Weight: Each Lifts up to 200lbs
  • Motor: Heavy Duty Torque
  • Method: Screw Drive
  • Adjustable: Yes
  • Limiter: Built In Switch
  • Travel/Stroke: 8\
  • Collapsed: Length 17\
  • Extended: Length 25\
  • Gear Ratio: 10:1 Quick Operation
  • Assembly: Sealed & Lubricated
  • Mounts: 4 Bolt On Brackets

Universal Power Upgrade Kit For Lambo, Gullwing, Suicide, Vertical Doors AutoLoc

Qty 2 10mm Quick Release End Lift Supports 19.25 Extended x 205lbs

Qty 2 10mm Quick Release End Lift Supports 19.25 Extended x 205lbs
Qty 2 10mm Quick Release End Lift Supports 19.25 Extended x 205lbs
Qty 2 10mm Quick Release End Lift Supports 19.25 Extended x 205lbs
Qty 2 10mm Quick Release End Lift Supports 19.25 Extended x 205lbs

Qty 2 10mm Quick Release End Lift Supports 19.25 Extended x 205lbs
Qty (2) 10mm “Quick Release” End Lift Supports 19.25 Extended x 205lbs. Specifications (See below for illustration). Extended Length: 19.25 Inches Compressed Length: 13.07 Inches Shaft End Fitting: Quick Release (Nylon) =10mm=3/8=. 39″ Body End Fitting: Quick Release (Nylon) =10mm=3/8″=. Gas Charged Lift Supports are energy storage devices which create force by compressing gas inside a cylinder. Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification. Important Notes about Lift Supports. Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification, please ensure you replace all the supports in the compartment at the same time to ensure proper performance. Our business is lift supports, and we make sure to sell newly produced units, keeping our inventory fresh and rotated. Please take a moment and be sure of what they are actually offering is the Stabilus. We stock several thousand different supports supplied from various quality manufacturers that are not listed here. If we don’t have it we can build many units to your specifications. Special lengths, different pressures or ends, send us the information. Have an existing support with part numbers on it send us any and all numbers that you can find. Depending on the product you are looking at warranties will vary. Lift Supports for the Hood, Trunk, Hatch, Liftgate or Tailgate (None Electrical types). These must be installed in the intended vehicle and the unit stops working properly or to your satisfaction. This policy is subject to change without notice. “Shaft down” is the preferred orientation for mounting a Lift Support. An optimum design would permit the support to be oriented shaft down through its entire actuation. If this is not possible then try to install it so that the shaft is pointing downward in the Closed Position. There are several reasons for this. In order to achieve the damping or “cushion” at the end of the Lift Supports stroke, the piston assembly inside of the Lift Support must travel through oil at the end of the stroke. “Shaft down” orientation ensures that the oil is in the proper location for damping to occur. “Shaft down” orientation ensures that the shaft and sealing components are lubricated with every stroke of the Lift Support. This reduces seal wear and helps to inhibit corrosion. Depending on the application, “shaft down” orientation may reduce the rate of gas permeation through the seal, which increases the usable life of the Lift Support. Some reasons why not to change the orientation of the support. Vehicles with power openers must be installed in the same direction as they came from the factory. Sensors on the door are adjusted to work in the way they were programmed. Installing in the opposite direction can cause them not to work properly. Some models of vehicles do not allow space for the cylinder to be reversed and this will cause a binding when the door or window closes. An example of this is the Ford Excursion Rear Window (or liftgate). Please keep in mind the more often that a cylinder is used the longer it will last. Sitting dormant for any period allows the shaft to bind to the seal and eventually tear. If the application must remain dormant then open the lift supports very slowly the first time they are used. The information provided is Subject To Change Without Notice. Make sure all of your auctions have ended prior to checking out. We accept Pay Pal and Major Credit cards. Please research this before ordering. Please research before ordering. Link at the bottom of this listing. In order to be able to assist you quickly we ask that you supply the following information. B Any and all numbers or markings that are on your old supports. C The part numbers that are on the actual supports that you received. (Not the number on the package but the actual supports). D The year, make, and model of your vehicle and any important details such as Convertible, with or without spoiler, or anything that you think would be helpful. Photos of the issues are great as well. Any items received without authorization are subject to delays and may not receive proper credit. Products that have been damaged during installation or altered will not be accepted. It may take several days to post to your account. Lost Or Damaged Packages: When a package is received damaged, open, or lost in transit we must be notified within 7 days to work with the shipper to correct the issue. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Other Interior Parts & Accessories”. The seller is “mrlousstuff” and is located in this country: US. This item can be shipped to United States, Canada, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Gambia, Malaysia, Taiwan, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Qatar, Burundi, Equatorial Guinea, Thailand, Aruba, Israel, Kuwait, Benin, Algeria, Antigua and Barbuda, Swaziland, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Djibouti, Chile, China, Mali, Botswana, Cambodia, Indonesia, Tajikistan, Vietnam, Cayman Islands, Paraguay, Saint Helena, Seychelles, Rwanda, Bangladesh, Australia, Sri Lanka, Gabon Republic, Zimbabwe, Côte d’Ivoire (Ivory Coast), Kiribati, Turkmenistan, Grenada, Haiti, Greenland, Yemen, Afghanistan, Mongolia, Nepal, Bahamas, Bahrain, Angola, Western Samoa, Mozambique, Namibia, Peru, Guatemala, Solomon Islands, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Western Sahara, Colombia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Ethiopia, Niger, Laos, Ghana, Cape Verde Islands, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Maldives, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, British Virgin Islands, Turks and Caicos Islands, Chad, Costa Rica, India, Mexico, Kazakhstan, Saudi Arabia, Japan, Trinidad and Tobago, Malawi, Nicaragua, Tunisia, Uganda, Brazil, Turkey, Tuvalu, Egypt, Jamaica, Niue, South Africa, Brunei Darussalam, Honduras.
  • Brand: Lift Supports Depot
  • Interchange Part Number: PM3553EZ10
  • Manufacturer Part Number: PM3553EZ10
  • Vehicle Location: Multi Purpose Lift Support

Qty 2 10mm Quick Release End Lift Supports 19.25 Extended x 205lbs

TeraFlex JK 3-4 Lift Front Sway Bar Quick Disconnect Kit (10)

TeraFlex JK 3-4 Lift Front Sway Bar Quick Disconnect Kit (10)

TeraFlex JK 3-4 Lift Front Sway Bar Quick Disconnect Kit (10)
TeraFlex Front Sway Bar Quick Disconnects are the industry leader thanks to their ease of use. The upper sway bar link end has an OEM quality narrow shoulder ball and socket for silent operation, long-term durability, and zero maintenance. The lower sway bar link end has a large polyurethane ball and pin for easy sway bar removal. The sway bar links quickly disconnect and swing up out of the way for unrestricted axle articulation during off-roading. While connected for street use, the link provides immediate reaction during sway bar loading to eliminate excess play. This results in improved lateral control and steering response compared to the stock rubber sway bar link bushings. LIFT HEIGHT: 3-4″ LENGTH: 10″. Fits all 2-door JK Wrangler and 4-door JKU Wrangler Unlimited models. Two (2) 10 front sway bar link ends. Two (2) upper stud frame brackets. Sway bar link length is measured center-to-center. INSTALL TIME: 1 Hour. JK 3-4″ Lift Front Sway Bar Quick Disconnect Kit (10″). Processing begins as soon as an order has been placed, therefore we cannot change, cancel or modify orders once they have been confirmed. Most e-mails are answered within 24 hours, including weekends and holidays. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Other Steering & Suspension Parts”. The seller is “sparktecmotors” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
  • Brand: TeraFlex Suspensions
  • Manufacturer Part Number: 1753000
  • UPC: 843885023227

TeraFlex JK 3-4 Lift Front Sway Bar Quick Disconnect Kit (10)

Bemis 1200SLOWT 063 Lift-Off Plastic Elongated Slow-Close Toilet Seat Venetia

Bemis 1200SLOWT 063 Lift-Off Plastic Elongated Slow-Close Toilet Seat Venetia
Bemis 1200SLOWT 063 Lift-Off Plastic Elongated Slow-Close Toilet Seat Venetia
Bemis 1200SLOWT 063 Lift-Off Plastic Elongated Slow-Close Toilet Seat Venetia
Bemis 1200SLOWT 063 Lift-Off Plastic Elongated Slow-Close Toilet Seat Venetia
Bemis 1200SLOWT 063 Lift-Off Plastic Elongated Slow-Close Toilet Seat Venetia
Bemis 1200SLOWT 063 Lift-Off Plastic Elongated Slow-Close Toilet Seat Venetia
Bemis 1200SLOWT 063 Lift-Off Plastic Elongated Slow-Close Toilet Seat Venetia
Bemis 1200SLOWT 063 Lift-Off Plastic Elongated Slow-Close Toilet Seat Venetia
Bemis 1200SLOWT 063 Lift-Off Plastic Elongated Slow-Close Toilet Seat Venetia
Bemis 1200SLOWT 063 Lift-Off Plastic Elongated Slow-Close Toilet Seat Venetia

Bemis 1200SLOWT 063 Lift-Off Plastic Elongated Slow-Close Toilet Seat Venetia
Bemis 1200SLOWT 063 Lift-Off Plastic Elongated Slow-Close Toilet Seat, Venetian Pink. Venetian pink, molded-in finish resists chipping, wearing and staining. Whisper close hinge helps prevent slamming. Product Description ELG CFWC E2 STA PLST ST. Bemis toilet seats bring quality, innovation and style to residential and commercial properties worldwide. Bemis toilet seats provide a wide variety of designs to easily integrate into any bathroom. The needs of residential and commercial customers are at the forefront of design with unmatched features and benefits that make everyday lives easier. Founded in 1901, and in the fourth generation of family ownership, Bemis has grown from a maker of furniture and wooden wagons to an international enterprise with manufacturing and warehousing facilities worldwide. In addition to manufacturing toilet seats, Bemis is one of North America’s top non-automotive producers of contract plastic injection-molded components. With a continued commitment to the worldwide community, Bemis Manufacturing Company strives to set the standard for ecological responsibility, conservation and preservation. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. This item is in the category “Home & Garden\Bath\Toilets & Bidets\Toilet Seats”. The seller is “hiroha-92″ and is located in this country: US. This item can be shipped to United States, Canada, Australia, Japan, China, South Korea, Indonesia, Taiwan, Hong Kong, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Malaysia, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, French Guiana, Guadeloupe, Jordan, Cambodia, Cayman Islands, Sri Lanka, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay.
  • Color: Venetian Pink
  • Size: Elongated
  • EAN: 0073088136510
  • ISBN: 0073088136510
  • Package Dimensions LxWxH: 20.98×14.69×2.6 Inches
  • Weight: 1.7 Pounds
  • Brand: Bemis
  • UPC: 073088136510

Bemis 1200SLOWT 063 Lift-Off Plastic Elongated Slow-Close Toilet Seat Venetia
Olderposts

Copyright © 2023 Lbs Quick Lift

Theme by Anders NorenUp ↑